Mic qPCR Cycler
micTVS
Temperature Verification System
Temperature Verification System (TVS)
Assured System Performance
Designed to meet the rigorous requirements of international quality standards, Mic TVS will verify the thermal accuracy of your Mic instrument. It uses a sensor permanently embedded in a tube so we know exactly what the temperature inside your tubes are. Each Mic TVS is calibrated in house on a system traceable to a NATA reference standard.
Plug & Play
The process is so simple anyone can do it! Built right into the Mic software is a wizard to guide you step by step through the process. Upon completion a report is generated which can be printed and stored for your documentation. The whole process is completed in less than 25 minutes.
Calibration of TVS
In addition we offer an annual calibration service for your Mic TVS so you can be sure your instruments are always performing at their best.
No Calibration Required
Nothing To Degrade
Common block based cyclers use Peltier elements. Peltier’s age as does the heat sink compound that keeps them in thermal contact with the block and the heat sink below. Mic is a non-contact system. The rotor is not in contact with anything physical just the induction field. That’s why nothing changes over time.
Workflow
Setup
Plug TVS unit into PC.
Load sensor tubes into Mic.
Verification
Follow the Wizard instructions.
Completed in less than 25 min.
Calibration of TVS
Report provides a document
of the verification.
Specifications
| Physical | Value |
| Dimensions | W: 45 mm, L: 125 mm, H: 80 mm |
| Length | 150 mm |
| Weight | 225 g |
| Hardware | |
| Input | USB |
| Performance | |||
| Temperature Accuracy | ± 0.25ºC | ||
| Verification Temperatures | 60 and 95ºC | ||
| Verification time | 25 min (approx.) | ||
| Operating Environment | |
| Temperature | 22 – 28ºC |
| Relative Humidity | 20 – 80% |
| Ordering | |
| TVS | REF MIC-TVS |
| TVS Calibration Service | REF MIC-TVSCAL |